OutBack Components

Mounts

	FLEXware MP The FLEXware MP is a one-piece, powder-coated aluminum mounting plate for FLEXware 500 and FLEXware 1000 enclosures. Utilizing stainless steel mounting hardware, the integrated locating bolts make installation quick and easy by providing guides to line up enclosures and inverter/chargers. A single FLEXware MP is designed to accommodate a FLEXware 500 while two FLEXware MPs are utilized in a FLEXware 1000 configuration.
	FW-CCB MX Charge Controller mounting bracket for one side mounted on FW500 or FW1000 DC enclosures - with mounting screws. Includes brackets, screws and conduit bushings
	FW-CCB2 MX Charge Controller mounting bracket for two side mounted on FX500 or FW1000 DC enclosures - with mounting screws. Includes brackets, screws and conduit bushings
	FW-CCB2-T MX Charge Controller mounting bracket for two top mounted FW500 or FW1000 DC enclosures - with mounting screws and flexible conduit. Includes brackets, screws and conduit bushings

↑ return to top

Ground Fault Protectors

OBB-GFP-80D-125VDC-PNL
OutBack PV Ground Fault Protection for one or two MX charge controllers. 80 Amp 125VDC dual pole Panel mount - uses three 0.75Ó (19 mm) mounting spaces.
Front panel mount with stud terminals on the back. Ring terminals required.

↑ return to top

Breakers

DIN Mount Breakers DIN rail mount with set-screw compression terminals, #14 to 2 AWG clamp terminals.
	OBB-15-120VAC-DIN 15 Amp 120VAC 50/60Hz single pole 0.50" (13 mm) wide Branch Circuit Rated 10k AIC.
	OBB-15D-240VAC-DIN 15 Amp 120/240VAC 50/60Hz dual pole 1.0" (26 mm) wide Branch Circuit Rated 10k AIC
	OBB-20-120VAC-DIN 20 Amp 120VAC 50/60Hz single pole 0.50" (13 mm) wide Branch Circuit Rated 10k AIC
	OBB-20D-240VAC-DIN 20 Amp 120/240VAC 50/60Hz dual pole 1.0" (26 mm) wide Branch Circuit Rated 10k AIC
	OBB-25D-240VAC-DIN 25 Amp 120/240VAC 50/60Hz dual pole 1.0" (26 mm) wide Branch Circuit Rated 10k AIC
	OBB-10-277VAC-DIN 10 Amp 277VAC 50/60Hz single pole 0.5" (13 mm) wide
	OBB-15-277VAC-DIN 15 Amp 277VAC 50/60HZ single pole 0.5" (13 mm) wide
	OBB-30-277VAC-DIN 30 Amp 277VAC 50/60Hz single pole 0.5" (13 mm) wide
	OBB-30D-480VAC-DIN 30 Amp 277/480VAC 50/60Hz dual pole 1.0" (26 mm) wide
	OBB-30T-480VAC-DIN 30 Amp 277/480VAC 50/60Hz three pole 1.5" (39 mm) wide
	OBB-50-277VAC-DIN 50 Amp 277VAC 50/60Hz single pole 0.5" (13 mm) wide
	OBB-50D-480VAC-DIN 50 Amp 277/480VAC 50/60Hz dual pole 1.0" (26 mm) wide
	OBB-50T-480VAC-DIN 50 Amp 277/480VAC 50/60Hz three pole 1.5" (39 mm) wide
	OBB-60-277VAC-DIN 60 Amp 277/480VAC 50/60Hz single pole 0.5" (13 mm) wide
	OBB-60D-480VAC-DIN 60 Amp 277/480VAC 50/60Hz dual pole 1.0" (26 mm) wide
Panel Mount Breakers Front panel, single pole mount with stud terminals on the back. Ring terminals required.
	OBB-1-150VDC120VAC-PNL 1 Amp, 150VDC and 120VAC, 1/4" stud terminals
	OBB-5-150VDC120VAC-PNL 5 Amp, 150VDC and 120VAC, 1/4" stud terminals
	OBB-10-150VDC120VAC-PNL 10 Amp, 150VDC and 120VAC, 1/4" stud terminals
	OBB-15-150VDC120VAC-PNL 15 Amp, 150VDC and 120VAC, 1/4" stud terminals
	OBB-20-150VDC120VAC-PNL 20 Amp, 150VDC and 120VAC, 1/4" stud terminals
	OBB-30-150VDC120VAC-PNL 30 Amp, 150VDC and 120VAC, 1/4" stud terminals
	OBB-30-250VAC-PNL 30 Amp, 250VAC, 1/4" stud terminals
	OBB-40-150VDC120VAC-PNL 40 Amp, 150VDC and 120VAC, 1/4" stud terminals
	OBB-50-150VDC120VAC-PNL 50 Amp, 150VDC and 120VAC, 1/4" stud terminals
	OBB-60-150VDC120VAC-PNL 60 Amp, 150VDC and 120VAC, 1/4" stud terminals
	OBB-80-150VDC-PNL 80 Amp, 150VDC, 1/4" stud terminals
	OBB-100-125VDC-PNL 100 Amp, 125VDC, 5/16" stud terminals
	OBB-125-125VDC-PNL 125 Amp, 125VDC, 5/16" stud terminals
	OBB-175-125VDC-PNL 175 Amp, 125VDC, 3/8" stud terminals
	OBB-250-125VDC-PNL 250 Amp, 125VDC, 3/8" stud terminals
PV Array Breakers DIN rail mount with set-screw compression terminals. Mount 0.5" (13 mm) wide - #14 to 2 AWG (1.62 mm to 6.54 mm diameter) clamp terminals
	OBB-1-125VDC-DIN 1 Amp 125VDC single pole DIN
	OBB-(amp)-150VDC-DIN 2, 3, 4, 5, 6, 8, 9, 10, 15, 20, 30, 50, 60 Amp 150VDC single pole DIN

↑ return to top

Fuses & Fuse Holders

For use in FLEXware PV with high voltage systems
	OBF-6-600VDC Fuse 6 Amp 600VDC
	OBF-10-600VDC Fuse 10 Amp 600VDC
	OBF-15-600VDC Fuse 15 Amp 600VDC
	OBFH-30-600VDC-DIN Fuse holder 30 Amp maximum 600VDC DIN mount.
Class T Fuse Blocks
	OBTFB-300 300 Amp Class T Fuse Block OBTFB-400 400 Amp Class T Fuse Block

↑ return to top

Terminal Bus Bar

Three #1/0 to 14 AWG and eight #6 to 14 AWG screw type compression terminals, mounting screws included. Rated at 180 Amps.
	TBB-GROUND Ground/Neutral terminal bus bar with mounting screws (no insulators).
	TBB-BLACK Bus bar with black insulators
	TBB-BLUE Bus bar with blue insulators
	TBB-RED Bus bar with red insulators
	TBB-WHITE Bus bar with white insulators
	TBB-BROWN Bus bar with brown insulators
Bus Connectors
	FW-BBUS Breaker Bus allows connection of two 175-250A, three 100-125A, four 1-80A DC breakers or three 500 Amp DC current shunts - plated copper rated for 500 Amp.
	FW-CBUS Combiner Bus connects up to eight DIN mounted breakers or four DIN mounted fuse holders - includes one 1/0 set screw lug - plated copper rated for 200 Amps.
	FW-SBUS Shunt Bus allows up to four high current cable connections on same side of DC shunt - includes two 3/8 inch bolts and mounting screws - solid brass rated for 1000 Amps.
DC Current Shunts Mounting screws included. Two 3/8" bolt terminals.
	FW-SHUNT250 500 Amp 50mV DC current shunt with attached terminal bus bar for mounting on top of a FX Series Inverter/Charger. Includes bus bar for connection to inverter's DC negative terminal.
	FW-SHUNT500 500 Amp 50 mV DC current shunt with attached terminal bus bar and one white insulator.

↑ return to top

Back to Balance of System

OutBack Components

Mounts

Ground Fault Protectors

Breakers

Fuses & Fuse Holders

Terminal Bus Bars

Mounts

Ground Fault Protectors

Breakers

Fuses & Fuse Holders

Terminal Bus Bar

Links & Downloads:

Quality Partners: